Submersible Level Sensor

KSL Submersible Level Sensor accurately measures static pressure of the liquid proportional to the level depth using high performance piezoresistive diffused silicon pressure sensor as the measuring element. The result is converted to standard current or voltage signal output through signal conditioning circuit, establishing the linear corresponding relation between the output signal and liquid depth to complete the measurement of the liquid depth. The product has advantages of high precision and small volume. The product is applicable to the measurement and control of the liquid level in the petroleum, chemical industry, power plant, urban water supply and hydrological exploration fields. It is also called "static pressure level transmitter ,submersible level transmitter, submersible water level meter etc .

1. Since the bottom of the tank or bilge is easy to deposit sludge, oil residue, etc., it is recommended to leave the measuring probe at a certain height from the bottom of the tank (bilge) to prevent debris from blocking the probe.

2. When the medium fluctuates greatly and the cable is long, the probe should be fixed with a sleeve to prevent the probe from swinging and affecting the measurement accuracy.

3. When the transmitter is installed on the side, the bending radius of the cable should be greater than 10 cm to avoid excessive bending and damage to the cable.

4. The ground terminal of the transmitter should be reliably grounded, and the power shield wire should be connected to it.

5. When measuring explosive dangerous goods, the relevant regulations in GB3836.1-83 "General Requirements for Explosion-proof Electrical Equipment for Explosive Environments" and GB3836.4-83 "Intrinsically Safe Circuits and Electrical Equipment "i"" must be strictly followed. installation.

6. The installation direction of the transmitter is vertical, and the installation position should be far away from the liquid inlet and the agitator.

Ordering Information Sheet